|
|
|
The IPBHZ beam clamp is used for horizontal lifting and transfer
of steel beams. The base is slotted to allow the clamps to be used from end of beams
as well as from the flange. This series of clamps can be used in the vertical and
horizontal moving, transfer and stacking of different types of structural designs, such
as I-Beams, H-beams, angles, etc, depending on the application desired.
|
|
For the Lifting and Transfer of Steel Beams
-
Available in capacities of .75 thru 4.5 metric tons.
-
Wide variety of jaw openings available: 0 to 1-1/2".
-
Welded alloy steel body for strength and smaller size. Forged
alloy components, where required.
-
Individually Proof Tested to 2 times the Working Load Limit
with certification.
-
Company name (IP), logo, Working Load Limit and jaw opening
permanently stamped on body.
-
Each product is individually serialized, with the serial number
and Proof Load test date stamped on body. Serial number is included on the test
certificate with maintenance and warranty logbook.
-
Maintenance replacement kits are available.
-
Manufactured by a ISO 9001 facility.
|
|
|
|
The IPBSNZ beam clamp is used for lifting, transfer and stacking. Offset
hoisting eye allows for level lifts of I-Beams, also for lifting fabrications and ship sections.
This series of clamps can be used in the vertical and horizontal moving, transfer and stacking
of different types of structural designs, such as I-Beams, H-beams, etc, depending on the
application desired.
|
|
