|
|
|
The IPBKZ beam clamp is used for lifting, transfer and
stacking of I-Beams. An over=center hoist eye allows for the beam flange to
remain vertical. This series of clamps can be used in the vertical and
horizontal moving, transfer and stacking of different types of structural
designs, such as I-Beams, H-beams, angles, etc, depending on the application
desired.
|
|
For Transfer and Stacking of Steel Beams
-
Available in capacities of .75 thru 3.75 metric tons.
-
Wide variety of jaw openings available: 3/16" to 1-1/8".
-
Welded alloy steel body for strength and smaller size. Forged
alloy components, where required.
-
Individually Proof Tested to 2 times the Working Load Limit
with certification.
-
Company name (IP), logo, Working Load Limit and jaw opening
permanently stamped on body.
-
Each product is individually serialized, with the serial number
and Proof Load test date stamped on body. Serial number is included on the test
certificate with maintenance and warranty logbook.
-
Minimum WLL of 10% Maximum WLL.
-
Maintenance replacement kits are available.
-
Manufactured by a ISO 9001 facility.
|
|
|
|
The IPVZ / IPVUZ beam clamp is used for vertical lift and
transfer of angle iron and other loads that have only a small gripping area for
the clamp ("U" has universal hoisting eye). This series of clamps can be used
in the vertical and horizontal moving, transfer and stacking of different types
of structural designs, such as I-Beams, H-beams, angles, etc, depending on the
application desired.
|
|
