|
|
|
The IPNM10 vertical lifting clamp is used for the lifting, turning, moving
or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to
horizontal (180) as needed without marring the surface of the material. Materials such as
aluminum, stainless steel, painted materials, aircraft skins, composite material, glass, plastic,
etc., can be lifted witout marring. The hinged hoisting eye allows for the clamp to place and
lift the load from any direction, or with a multiple leg sling without side-loading the clamp.
Will NOT mar, or scratch the material surface.
|
|
For Vertical Lifting, Turning and Transfer
-
Available in capacities of .5 thru 1 metric tons.
-
Wide variety of jaw openings available: 0 to 3/4".
-
Welded alloy steel body for strength and smaller size. Forged
alloy components, where required.
-
Individually Proof Tested to 2 times the Working Load Limit
with certification.
-
Company name (IP), logo, Working Load Limit and jaw opening
permanently stamped on body.
-
Each product is individually serialized, with the serial number
and Proof Load test date stamped on body. Serial number is included on the test
certificate with maintenance and warranty logbook.
-
Full 180 turning range for material transfer, turning or moving.
-
Lock open, lock closed ability with latch for pretension on material and then
release of material.
-
Maintenance replacement kits are available.
-
Manufactured by a ISO 9001 facility.
|
