The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180) as needed. Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines.

For Vertical Lifting, Turning and Transfer

  • Available in capacities of .5 thru 30 metric tons (Higher Working Load Limits are available upon request).
  • Wide variety of jaw openings available: 0 to 6-1/8".
  • Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
  • Individually Proof Tested to 2 times the Working Load Limit with certification.
  • Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body.
  • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.
  • Available in a variety of styles:
  • IP10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB)
  • IP10J - Larger jaw opening.
  • IP10S - For use with Stainless Steel material.
  • IP10H - For use with materials with a surface hardness to 47Rc (450 HB).
  • Full 180 turning range for material transfer, turning or moving.
  • Lock open, lock closed ability with latch for pretension on material and then release of material.
  • Minimum WLL of 10% Maximum WLL.
  • Maintenance replacement kits are available.
  • Manufactured by a ISO 9001 facility.

Model IP10

Model Working
Load Limit
(Tons) 		IP10 Stock No. Weight
Each
(lbs.)

Dimensions
(in.)

Jaw A B C D E F G H J K

IP10

0.5

2701674

4

0 - .63

1.73

5.05

8.16

1.19

4.53

1.61

1.11

--

.39

IP10

1

2701662

4.4

0 - .75

1.75

5.47

8.46

1.19

4.47

1.63

1.5

--

.39

IP10

2

2701676

15

0 - 1.38

3.08

7.91

13.23

2.75

7.47

2.41

2.17

--

.63

IP10

3

2701664

30.4

0 - 1.63

3.94

9.95

17.17

2.95

8.86

3.08

2.36

--

.78

IP10

4.5

2701666

33

0 - 1.63

3.94

9.95

17.17

2.95

8.86

3.23

2.56

--

.78

IP10

6

2701668

51.8

0 - 2.00

4.95

11.89

20.28

3.16

11.5

3.31

3.73

1.58

.78

IP10

9

2701670

60.6

0 - 2.00

4.95

12.8

21.66

3.17

12.2

3.13

4.14

1.73

.78

IP10J

9

2701672

62.8

2.00 - 3.88

4.95

12.8

21.84

3.16

14.17

3.13

4.14

1.73

.78

IP10

12

2701678

108

0 - 2.13

6.3

15.39

22.83

3.16

13.03

4.61

5.39

1.61

1

IP10J

12

2701680

128

2.13 - 4.25

7.02

17.28

24.8

3.16

16.34

4.61

5.39

1.61

1

IP10

16

2701682

150

.25 - 2.50

7.02

18.31

27.17

3.47

15.63

4.69

6.03

1.92

1

IP10J

16

2701684

200

2.50 - 5.00

8.19

20.52

29.38

3.47

18.58

4.99

6.34

1.92

1

IP10

22.5

2701686

238

.25 - 3.13

8.73

21.81

31.5

4.33

18.5

5.45

7.33

1.92

1

IP10J

22.5

2701688

243

3.13 - 6.13

9.95

24.72

34.64

4.33

22.64

5.36

7.72

1.92

1

IP10

30

2701690

326

.25 - 3.13

8.72

21.45

31.5

4.33

18.5

5.98

7.22

2.13

1.19

IP10J

30

2701692

335

3.13 - 6.13

9.84

24.41

34.64

4.33

22.25

5.98

7.72

2.13

1.19
For stainless steel - with universal hoisting eye

IP10S

0.5

2702274

4

0 - .63

1.73

5.05

8.16

1.19

4.53

1.61

1.11

--

0.39

IP10S

1

2702262

4.4

0 - .75

1.75

5.47

8.46

1.19

4.47

1.63

1.5

--

0.39

IP10S

2

2702276

15

0 - 1.38

3.08

7.91

13.23

2.75

7.47

2.41

2.17

--

0.63

IP10S

3

2702264

30.4

0 - 1.63

3.94

9.95

17.17

2.95

8.86

3.08

2.36

--

0.78

IP10S

4.5

2702266

33

0 - 1.63

3.94

9.95

17.17

2.95

8.86

3.23

2.56

--

0.78
For very hard materials - with universal hoisting eye

IP10H

0.5

2702174

4

0 - .63

1.73

5.05

8.16

1.19

4.53

1.61

1.11

--

0.39

IP10H

1

2702176

15

0 - 1.38

3.08

7.91

13.23

2.75

7.47

2.41

2.17

--

0.63

IP10H

2

2702164

30.4

0 - 1.63

3.94

9.95

17.17

2.95

8.86

3.08

2.36

--

0.78

IP10H

3

2702166

33

0 - 1.63

3.94

9.95

17.17

2.95

8.86

3.23

2.56

--

0.78

* Ultimate load is 5 times the Working Load Limit.