The IPU10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180) as needed. The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg sling with out side-loading the clamp.

Universal - For Lifting in any Direction

  • Available in capacities of .5 thru 30 metric tons (Higher Working Load Limits are available upon request).
  • Wide variety of jaw openings available: 0 to 6-1/8".
  • Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
  • Individually Proof Tested to 2 times the Working Load Limit with certification.
  • Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body.
  • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.
  • Available in a variety of styles:
    • IPU10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB).
    • IPU10J - Larger jaw opening.
    • IPU10S - For use with Stainless Steel material.
    • IPU10H - For use with materials with a surface hardness to 47Rc (450 HB).
  • Full 180 turning range for material transfer, turning or moving.
  • Lock open, lock closed ability with latch for pretension on material and then release of material.
  • Minimum WLL of 10% Maximum WLL.
  • Manufactured by a ISO 9001 facility.

IPU10S: For use on Stainless Steel material.
IPU10H: For use on materials with a surface hardness to 47Rc (450 HB).

Model Working
Load Limit
(Tons) 		IPU10 Stock No. Weight
Each
(lbs.)

Dimensions
(in.)

Jaw A B C D E F G H J K

IPU10

0.5

2701675

4.2

0 - .63

1.73

5.05

8.97

1.19

4.53

1.61

1.11

--

.39

IPU10

1

2701663

4.6

0 - .75

1.75

5.47

8.75

1.19

4.47

1.63

1.5

--

.39

IPU10

2

2701677

16.8

0 - 1.38

3.08

7.91

14.64

2.75

7.47

2.41

2.17

--

.63

IPU10

3

2701665

32.6

0 - 1.63

3.94

9.95

17.52

2.95

8.86

3.08

2.36

--

.78

IPU10

4.5

2701667

35.3

0 - 1.63

3.94

9.95

17.52

2.95

8.86

3.23

2.56

--

.78

IPU10

6

2701669

52.9

0 - 2.00

4.95

11.89

20.67

3.16

11.5

3.31

3.73

1.73

.78

IPU10

9

2701671

65

0 - 2.00

4.95

12.8

21.92

3.17

12.2

3.13

4.14

1.73

.78

IPU10J

9

2701673

67.2

2.00 - 3.88

4.95

12.8

22.13

3.16

14.17

3.13

4.14

1.73

.78

IPU10

12

2701679

125.7

0 - 2.13

6.3

15.39

24.53

3.16

13.03

4.61

5.39

1.61

1

IPU10J

12

2701681

130

2.13 - 4.25

7.02

17.28

26.5

3.16

16.34

4.61

5.39

1.61

1

IPU10

16

2701683

174

.25 - 2.50

7.02

18.31

28.89

3.47

15.63

4.69

6.03

1.77

1

IPU10J

16

2701685

203

2.50 - 5.00

8.19

20.52

31.11

3.47

18.58

4.99

6.34

1.77

1

IPU10

22.5

2701687

281

.25 - 3.13

8.73

21.81

33.66

4.33

18.5

5.36

7.33

1.92

1

IPU10J

22.5

2701689

288

3.13 - 6.13

9.95

24.72

36.61

4.33

22.64

5.36

7.72

1.92

1

IPU10

30

2701691

337

.25 - 3.13

8.72

21.45

33.86

4.33

18.5

5.98

7.22

2.13

1.19

IPU10J

30

2701693

364

3.13 - 6.13

9.84

24.41

36.81

4.33

22.25

5.98

7.72

2.13

1.19
For stainless steel - with universal hoisting eye

IPU10S

0.5

2702275

4.2

0 - .63

1.73

5.05

8.97

1.19

4.53

1.61

1.11

--

0.39

IPU10S

1

2702263

4.6

0 - .75

1.75

5.47

8.75

1.19

4.47

1.63

1.5

--

0.39

IPU10S

2

2702277

16.8

0 - 1.38

3.08

7.91

14.64

2.75

7.47

2.41

2.17

--

0.63

IPU10S

3

2702265

32.6

0 - 1.63

3.94

9.95

17.52

2.95

8.86

3.08

2.36

--

0.78

IPU10S

4.5

2702267

35.3

0 - 1.63

3.94

9.95

17.52

2.95

8.86

3.23

2.56

--

0.78
For very hard materials - with universal hoisting eye

IPU10H

0.5

2702175

4.2

0 - .63

1.73

5.05

8.97

1.19

4.53

1.61

1.11

--

0.39

IPU10H

1

2702177

16.8

0 - 1.38

3.08

7.91

14.64

2.75

7.47

2.41

2.17

--

0.63

IPU10H

2

2702165

32.6

0 - 1.63

3.94

9.95

17.52

2.95

8.86

3.08

2.36

--

0.78

IPU10H

3

2702167

35.3

0 - 1.63

3.94

9.95

17.52

2.95

8.86

3.23

2.56

--

0.78

* Ultimate load is 5 times the Working Load Limit.